Tabla de contenido
Publicidad
Bruksanvisning
Sängvibratorn kan du använda tillsammans med din Visit-
laddare eller Visitmottagare. Den väcker dig med vibrationer
under madrassen eller huvudkudden.
Gör så här
1 Anslut sängvibratorn genom att sätta i kontakten i sängvibrator-
uttaget på laddaren eller mottagaren (se nedan).
2 Tryck på testknappen på någon av de sändare du har till Visit-
systemet och kontrollera att sängvibratorn vibrerar.
Obs! När du ansluter sängvibratorn till pagerladdaren måste
pagern sitta i laddaren för att sängvibratorn ska fungera.
15
Technical information
SE
Operating voltage
Power consumption
Dimensions
Weight
Colour
Cable length
Function
Installation
Testing
Usage and storage
Care and cleaning
Troubleshooting
If
The bed shaker does not
vibrate
2.0 - 4.0 V DC from a Visit receiver or charger
250 - 750 mA
88 x 88 x 27 mm (w x h x d)
120 g
White with red rubber anti-skid protector
2 meters
The BE1270 Bed shaker is a vibrator for indoor use
that is placed in the bed to attract the attention of
the user with vibrations.
The bed shaker is usually placed under a pillow or
under the mattress. It is connected to a range of
Bellman & Symfon products with vibrator outputs.
Connect the bed shaker to a Visit receiver or charger
with vibrator output and follow the testing procedure.
For indoor use only. Temperature during transport
and storage: –10° to 50° C, 14° to 122° F. Tempera-
ture during operation: 0° to 35° C, 32° to 95° F
Relative humidity: 15% -90% (non condensing).
Maintenance free. Clean with a soft cloth. Do not use
cleaners, solvents, ammonia or alcohol. Not reusable.
Try this
• Check that the plug is connected
correctly.
• Check that the receiver is picking up
signals.
APP
16
Publicidad
Tabla de contenido
