Introduction; Description Of The Elements; Pictograms - CEVIK PRO CE-M1800PRO Manual De Instrucciones

EN

1. INTRODUCTION.

We appreciate your trust in our brand and we hope that the welding equipment you have just acquired
will be very useful. Your machine has many features that will make your work faster and easier. Safety,
comfort, reliability have been considered as priorities for the design of this tool, for an easy maintenance
and operation.
This electronic mixer is designed to mix liquids, mortars, adhesive pastes, paints, epoxy resins, cement
and similar products.
The optimal performance of the mixer depends on the density of the product to be used and the quantity
to be mixed. You must use the proper gear, speed and rod for each occasion.

2. DESCRIPTION OF THE ELEMENTS.

Unpacking equipment. Inspect that no item shows any damage that may have occurred during transport.
Check that the contents of the packaging correspond to this relationship:
•
1 mixer M1800R.
•
1 mixing paddle, in two pieces.
•
1 set of brushes.
•
1 fixed key for rod assembly.
•
1 instruction manual.
Structure of the mixer:

3. PICTOGRAMS.

The use of symbols in this manual is intended to draw your attention to possible hazards. Safety symbols and
accompanying explanations must be perfectly understood. Warnings in and of themselves do not eliminate risks
and cannot replace correct actions to prevent accidents.
1. Engine body.
2. Brush housing.
3. Main handle.
4. Speed regulator.
5. Rod connection M14.
6. Mixing rod.
7. Gearbox.
8. Lock button.
9. Change mechanical gears.
10. Activation button.
21