Settings; Scan Settings; Audio Settings; Bluetooth Mode - Albrecht Audio DR 895 CD Manual

7.5. Settings

7.5.1. Scan settings

By default FM scans stop at any available station. Change the
scan settings to stop only at stations with good signal strength, EN
select YES after choosing "Strong station only?".

7.5.2. Audio settings

All stereo stations are played in stereo. For weak stations, this
may result in a poor signal-to-noise ratio. To play weak stations in
mono, select FM>Audio settings: "Listen in mono only".

8. Bluetooth Mode

The DR 895 CD is able to connect to other Bluetooth sources and
play their audio streams. Please note that the maximum Bluetooth
range is about 10 meters and the radio is not able to connect to
other Bluetooth headsets, but sources only, such as smartphones.
To enter Bluetooth Mode, press to choose Bluetooth and
press OK.
When you select the Bluetooth mode, the device is entering the
pairing mode. Turn on your smartphone/tablet/other Bluetooth
device to search for the radio. The Bluetooth pairing name of the radio adapter is „DR 895 CD". If
pairing is successful, the screen will show „Connected" and the DR 895 CD will start playing music
from your device.
When DR 895 CD is waiting for pairing, there is a blinking Bluetooth icon at the bottom. If the pairing
is successful, it has a "beep" sound and the Bluetooth icon becomes steady.
Control the music playback from your Bluetooth device. To unpair from DR 895 CD, press and hold
MENU and choose BT disconnect or press and hold to unpair Bluetooth.

9. CD Mode

DR 895 CD can playback CD-DA format audio CD-R/CD-RW discs that have been finalised* upon
completion of recording. It may fail to play some CD-R/CD-RW discs due to poor recording and wide
variation in quality of the CD-R/CD-RW disc.
*Finalising enables a CD-R/CD-RW disc to playback on audio players. A disc which has not been
finalised may have information added to it using a computer but may not always be playable.
To enter CD Mode, press , choose CD and press OK
Insert a disc with the printed side facing up. The disc will be loaded automatically. The unit will check
the CD type and load its track list. The display will show 'Loading' during the CD is being read and
will begin to play afterwards.

9.1. Playback

Use or to play the previous or next track, press and hold or to rewind or fast forward.
Press to pause the track. Press it again to resume. Press to stop the track.
To take out the CD, press . You can press the number key to go to the selected track.
English 35