Craftsman 919.166701 Manual Del Propietário página 15

All manuals and user guides at all-guides.com
1. Hold "quadraport" and pull
quick- connect coupler (D) back
to release and remove as shown.
E
D
G
2. Attach one end of a 1/2" hose
(E) with 3/8" quick-connect back
flow safety check valve (F)
(provided in kit) as shown. Make
sure quick-connect coupler is
secure.
To prevent
possible injury,
ALWAYS use back flow safety
check valve included with unit
to connect "quadraport" to hose
for use at a remote location. If
replacement back flow safety
check valve is needed refer to the
Parts Manual.
Note: Always use pipe sealant tape
when connecting hoses or fittings to
prevent air leaks.
3. Attach the other end of the 1/2"
hose (E) with 3/8" universal quick
connect body (G) to the
"quadraport" as shown. NOTE:
As shown below to assemble
3/8" universal quick connect
body to hose.
3/8" Universal quick
connect body
Connector
OR
3/8" Universal quick
connect body
4.
F
D
5.
Hose
Hose
15 - ENG
Attach 3/8" hoses (A) with 1/4"
industrial quick-connect plugs (B)
to the outlets (C). One to four
tools can be used at the same
time.
C
The "quadraport" can be
temporarily or permanently
mounted at the work site using
the three mounting holes (F).
F
B
A
A13570