Publicidad
English
CAUTION
To reduce the risk of fire, electric shock, or injury to
persons: Use only insulated staples or plastic ties to
secure cords. Route and secure cords so that they will
not be pinched or damaged when the cabinet is pushed
to the wall. Not intended for recessed installation in
ceilings, or soffits. The low-voltage portable cabinet light
may be installed inside or under a kitchen cabinet or
other built-in furniture when:
1. The low-voltage Class 2 power supply is located
outside the cabinet and is not concealed; and
2. The line voltage power supply cord is not concealed
or run through openings in the cabinet, walls, ceilings,
or floors. This requirement does not apply to the wiring
between the cabinet light and the power unit. The
National Electric Code (NEC) does not permit cords
to be concealed where damage to insulation may go
unnoticed. To prevent fire danger, do not run cord
behind walls, ceilings, soffits, or cabinets where it may
be inaccessible for examination. Cords should be visually
examined periodically and immediately replaced when
any damage is noted.
3
Publicidad
