D-Link DAP-2695 Guia De Instalacion página 8

When you have completed the steps in this Installation Guide and configured
your for your network, your network should look similar to this:
To setup and manage the DAP-2695 from a computer, use one of the following
methods:
1. Connect a straight through Ethernet cable between the access point and your
computer.
2. Connect the access point to a switch or router and use a computer from a
computer that is also connected to that switch or router.
* Maximum Wireless signal rate derived from draft IEEE802.11ac specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
TECHNICAL SUPPORT
United Kingdom (Mon-Fri) , Website: http://www.dlink.com
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri), Website: http://www.dlink.com
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak times
8
DAP-2695_A1_QIG_v1.00(EU).indd 8
All manuals and user guides at all-guides.com
Your Setup is Complete
D-Link DAP-2695 Quick Install Guide
2013/8/19 下午 02:21:03