Functional Description - Milwaukee MX FUEL MXF370 Serie Manual Del Operador

Ocultar thumbs

Contenido

página de 21

/ 21
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a fire.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

CONCRETE VIBRATORS

•

To reduce the risk of injury, wear

WARNING

protective gloves and boots when

working with wet concrete.

• Do not use accessories which are not specifically

designed and specified by the tool manufacturer.

Just because the accessory can be attached to your

power tool, it does not assure safe operation.

• Always install flex shaft and head according

to the manufacturer's instructions. Only use

accessories matching the tool coupler.

• If using with a lanyard, do not exceed maximum

capacity marked on the lanyard label. Always de-

termine the weight of the product, with all accesso-

ries, when selecting the appropriate lanyard system.

Exceeding maximum capacity may result in serious

injury. See specifications for tool and battery weight.

• For best results, use with energy absorbing

lanyards. Ropes, straps or chains may break and

cause failure. Do not use with lanyards at full tension.

Do not use lanyards longer than 3 feet.

• Chemical Burn Hazard. Keep coin cell battery

away from children.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.