Cleaning And Maintenance - Evolution R13 CMB Li Instrucciones Originales

Switching on and off
• To switch on the machine, press the variable
speed trigger (6).
• To switch off the machine, release the
variable speed trigger.
Variable speed
Pressing the variable speed trigger (6) harder
increases the speed.
A low or high speed range can be set with the
speed selector switch (3).
I
Low speed range: Slide the switch forwards
for working with large drill diameters.
II
High speed range: Slide the switch
backwards for drilling with small drill diameters
Security system
The protection system automatically switches off
the power to the motor if:
The machine is overloaded - Stop the
•
application causing the machine to become
overloaded and switch the machine on
again.
In the event of engine overheating - Allow
•
the machine to cool down in this situation
before switching it on again.

CLEANING AND MAINTENANCE

The machine does not require any special
maintenance.
• Regularly clean the ventilation slots.
• Use a mild detergent on a damp cloth to
clean the plastic parts of the machine. Do
not use any cleaning agents and never let
water come into contact with the machine.
www.evolutionpowertools.com
ENVIRONMENT
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EU
concerning old electric and electronic equipment
and its implementation in national laws, old
electric power tools have to be separated from
other waste and disposed of in an environment-
friendly fashion, e.g. by taking to a recycling
depot.
Recycling alternative to the return request:
As an alternative to returning the equipment
to the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
Environmental damage through incorrect disposal
of the batteries / rechargeable batteries.
Batteries /rechargeable batteries may not be
disposed of with the usual domestic waste. They
may contain toxic heavy metals and are subject to
hazardous waste treatment rules and regulations.
Please dispose of batteries according to the
relevant local requirements.
Remove the battery from the product before
disposal.
10