Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Transmitter Operation
1. Connect the supplied AC power adaptor to an electrical wall outlet.
2. Plug the AC power adaptor (12V/200mA) in the DC jack located on the rear of the
transmitter, or you can insert 4 X "AA" size ALKALINE batteries into the battery
compartment of the transmitter with correct polarity.
3. Turn on the transmitter by set the POWER switch to ON position, and the POWER LED
(blue) on transmitter will start flashing.
4. The retractable audio cord that located at the front of transmitter can be connected to audio
output jack of any audio source such as i-Pod, i-Phone, MP3 handphone, Hi-Fi,
MP3/CD/VCD/DVD players and etc.
5. As soon as the transmitter is receiving the audio signal, the POWER LED (blue) will
illuminate steady.
P.3
Publicidad
