INFOSEC UPS SYSTEM Zenergy Station 2000 Manual Del Usuario página 9

1 1 . T E C H N I C A L S P E C I F I C A T I O N S
Power
Physical
features
Input
technical
features
Output
technical
features
(Inverter mode,
backup time
outlets)
Battery
features
Environment
Light
Indicators
Audible alarm
Manufacturing
INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr - 10 04 04 206 13
All manuals and user guides at all-guides.com
Backup time outlets
Surge protected
outlets
Full Protection
Dimensions
(D x W x H)
4 German type
(shuko) outlets
Weight (nw) kg
Voltage
Frequency
Max Intensity on
backup time outlets
Voltage range
Frequency
Waveform
Battery type
Recharging time
Backup time
(depending on the load)
Operation temp.
Operation humidity
Line mode
Battery mode
Fault
Battery mode
Low battery
Overload
Fault
Security / Standard
Zenergy station
2000
400 VA
7A
Overload, short circuit & tel/fax/modem
surge protection
300 x 125 x 85 (mm)
2 outlets with backup time
2 surge protected outlets
3,2
220/230/240 VAC
45~65 Hz
1.8 A
220/230/240 VAC ± 10%
Auto sensing 50 Hz or 60 Hz ± 1 Hz
Modified sine wave
12V 4.5Ah x 1pc
8 hours up to 90%
Up to 10 mn
0-40° C
20%-90% (non condensing)
Green led lighting
Orange led flashing
Red led lighting
Sounding every 5 seconds
Sounding every second
Sounding twice a second
Continuously sounding
CE – ISO 9001
Zenergy station
3000
600 VA
7A
3,5
2.75 A
1221 W x 1pc
Up to 20 mn
9