Publicidad
English
3. Charging USB chargeable devices using solarMate-10
There are 2 ports available on solarMate-10. It is recommended to use the 1.3A
charging output port to charge smartphones and the 2.1A charging output port to
charge tablet devices. Plug the USB cable into the USB output port on solarMate-10
back-up battery and the other end into the device. Press the multi-function button
once to start charging your device. Detach the USB cable once charging is
complete.
4. Using the LED Light on solarMate-10
• Press and hold the Multi-function button for 3 seconds to turn 'on' the LED Light.
• Again press the Multi-function button for 3 seconds to turn 'o ' the LED Light.
6
Publicidad
