Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento página 16

3 Use the search dial to select the language and press set. Once selected you will
automatically return to the setup menu.
Date
To adjust the date, select the date field and press set. Using the search dial you can select the
day, month and year. This will populate the timestamp file suffix when selected.
Time
To adjust the time, select time and press set. Use the search dial to adjust the hours and
minutes. HyperDeck Shuttle HD's internal clock is a 24 hour clock.
Software
Displays the current software version.
Camera
This setting is helpful when using HyperDeck to record ISO files from multiple cameras and
then editing them on a multicamera timeline in DaVinci Resolve.
Each individual camera identification letter will appear in the files' metadata, allowing DaVinci
Resolve to identify each angle easily when using the sync bin feature.
Default Standard
Sometimes the HyperDeck Shuttle HD does not know what video standard you want to use.
This setting will let the HyperDeck know the video standard you want to use most of the time.
A good example is if you have turned on a HyperDeck Shuttle HD, it has no video input
connected and you insert a disk with files on it with 2 different video standards. Which video
standard should the HyperDeck play? The default video standard will give it an indication which
video standard you prefer and it will switch to that format and play those files.
The default video standard is also useful when you first turn on a HyperDeck Shuttle HD and
it has no video input and no media disk inserted. In this case, the HyperDeck does not know
which video standard to use for the monitoring output. The default video standard will guide it
on what to do.
However, the default video standard is only a guide. It won't override anything. So if you had a
media disk with only 1 type of video file on it and you press play, the HyperDeck disk recorder
will switch to that video standard and play. It will ignore the default video standard because it's
obvious you just want to play the files on the disk.
It's a similar situation with recording. If you press record, the HyperDeck will just record
whatever video standard is connected to the video input. Plus, once you have done the
recording, the HyperDeck Shuttle HD will playback the same video standard files on the disk,
Assign your camera using characters A-Z or 1-9
Settings 16