Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento página 29

When connecting to HyperDeck Shuttle HD, you don't need to enter a username or password.
Simply enter your disk recorder's IP address in your FTP application's 'server' or 'host' field and
check an 'anonymous login' checkbox if one is available.
Transferring Files
Once connected to your HyperDeck you can transfer files as you normally would with your
ftp program. Most ftp applications have a drag and drop interface but check your particular
application for the appropriate method.
You can transfer any file to and from your HyperDeck, but it's worth noting that any files you
intend to play back from HyperDeck Shuttle HD will need to conform to your HyperDeck's
supported codecs and resolutions.
TIP You can transfer files over a network while your HyperDeck is recording.
HyperDeck will automatically adjust transfer speeds to make sure recording is
not affected.
Transferring Files over a Network 29