Dirt Hawg DH12000 Manual Del Usuario página 7

12 Gallon Dirt Hawg 9/10/04
Wet/Dry Vac Assembly (Continued)
6. Insert the push button end of the locking
hose into the inlet of the vac. The hose
should snap into place. To remove the
hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
7. Place the utility nozzle or other
accessories securely on the opposite
end of the hose and the vac is ready
for use.
Cord Wrap
Area
Blowing Port
Lid Handle
Dust Drum
Storing Your Accessories
1. Slide the extension handles and the
accessories into the slotted areas of the
caster feet for storage.
2. To remove the accessories, lightly rotate
and pull upward.
2:16 AM Page 7
On-Off Switch
Vacuum Port
Drain
7
Release
Press and
Button
Pull
Release Button
Swivel End
Utility Nozzle