L-Mount Kit Installation - Keysight Technologies U2300A Serie Guia Del Usuario

1 Getting Started

L-Mount Kit Installation

The L-Mount kit is to be used with Keysight U2781A USB modular instrument
chassis. The following instructions describes simple procedures of installing the
L-Mount kit to a U2300A DAQ device.
22
1
Unpack the L-Mount kit from the
packaging.
2
Remove your DAQ device from its plastic
casing by pulling the bumper (front end of the
casing) in an outward direction. Then, lift the
plastic body casing and remove it from your
DAQ device.
3
Using a Philips screw driver, screw the
L-Mount kit to your DAQ device.
Keysight U2300A Series User's Guide