Emerson MOON LK65 Serie Manual Del Usuario página 12

5. Installation on Emerson Fans Having
Two-Piece Die-Cast Switch Housing (continued)
5.6
Carefully tuck all Wires and Connectors into the Switch
Housing (Figure 17).
Attach the Light Fixture by aligning the Screws in
Switch Housing with the Keyhole Slots in top of the
Fixture. Turn the Light Fixture slightly to hold in place
and then tighten the Two Screws securely from the
bottom (Figure 17).
NOTE: Make sure that the light fixture assembly
chain bushing stays aligned with the switch
housing fan chain.
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires between switch housing and the light
fixture assembly.
5.7
Position the Switch Housing Pull Chain through the
Light Fixture Assembly Chain Bushing (Figure 18).
All manuals and user guides at all-guides.com
12
SWITCH
HOUSING
LIGHT FIXTURE
ASSEMBLY
KEYHOLE SLOTS (2)
TOP OF THE LIGHT
FIXTURE ASSEMBLY
Figure 17
LIGHT FIXTURE ASSEMBLY
CHAIN BUSHING
Figure 18
SWITCH
HOUSING
PULL CHAIN
U.L. Model No.: LK65