Usb/Sd Mode - Technaxx TX-103 Manual De Usuario

Repeat Function
 During playback, press the REPEAT button once to repeat a
single track. The "REP" LED indicator light will blink.
 During playback, press the REPEAT button one more time to
repeat all tracks. The "REP" LED indicator light will stay lit.
Program Function
 In STOP mode, press the PROGRAM button. The display will
show "01".
 Press (▶▶/◀◀) to select a track and press the PROGRAM button
again to save the track.
 Press (▶▶/◀◀) to select another track and press the PROGRAM
button again. Repeat this step to continue saving tracks.
 To play back the programmed tracks, press the PLAY/PAUSE (▶‖)
button.
 To erase the programmed track, press the STOP (■) button twice.

USB/SD Mode

USB/SD Card Playback
 Turn ON the unit and adjust the volume to an appropriate level.
 Insert a USB device into the USB port. Alternatively insert a SD
card into the SD card slot, making sure to insert it straight without
bending.
 Turn the function knob to CD position.
 To play music from the USB drive, press and hold the "■ /USB/SD"
button for 2 seconds until "Ud" flashes on the display and let go of
the button. Music playback will start automatically.
 To play music from an SD card, press and hold the "■ /USB/SD"
button for 2 seconds again until "Sd" flashes on the display and let
go of the button. Music playback will start automatically.
16