Stand-By Function; Faq's - Technaxx TX-103 Manual De Usuario

Stand-by function

 When the deive is not playing music on Phono, CD, USB, SD,
AUX, Tape, long press "REP/PROG/STBY" button for 4 seconds, the
unit will enter into standby mode. Then short press "▶‖" button, it will
work again.
 The Unit will enter into standby mode automatically after approx.
15 minutes when it is not playing music. Then short press "▶‖" button,
it will work again.

FAQ's

Device will not power on  Make sure that the unit‟s power cord is
connected to an appropriate electrical outlet and the wall socket is
switched on.
There is no sound  Rotate the power/volume knob clockwise to
increase the volume.
The cassette tape will not play  Make sure the function knob is
set to your desired function. Make sure it is properly inserted.
The vinyl record will not play  Make sure the function knob is set
to you desired function. Make sure you have selected the right
speed (33, 45 or 78 RPM).
Nothing will play via the AUX IN connection  Make sure the
cable is firmly connected and check if external device is clean and
undamaged. Check the function knob is set to your desired function.
Check that volume of external device is at 70-80%.
Nothing will play via the USB device or SD card  Make sure the
memory device is properly inserted in the USB port (or SD card slot)
and the correct function is selected. The media may need to be
formatted.
NOTE: If normal operation cannot be obtained, unplug the power
cord from the power outlet and plug it in again.
22