Panasonic EW-DC12 Instrucciones De Funcionamiento página 16

4
Wipe off the water on the brush head and main
unit.
• Do not charge while it is wet.
(Doing so may cause soiling.)
If the identification ring comes off
As shown in the right figure, install the
identification ring with its convex part
( b ) aligned with the concave part ( a )
of the brush head.
• Do not forcefully pull the
identification ring.
(Doing so may cause damage.)
• Using the toothbrush without the
identification ring has no effect on its
performance.
Cleaning the charger
1. Disconnect the power plug from the
household outlet.
2. Slide and remove the main unit
guide.
16
PB019965 - EW-DC12 _(01GB)_02-19-21.indd 16
3. Wash the main unit guide with
running water before wiping
remaining water off.
• Except for the main unit guide, all
other parts cannot be washed with
water.
4. Wipe off the dirt on the bottom of
the charger with soft cloth.
► Attaching the main unit guide.
 Align the main unit guide with the specified line of
a
the charging stand.
b
 Slide the main unit guide until it clicks into place.

Wipe the prongs of the power plug with a
dry cloth about once every 6 months.

2021/2/19 15:30:49