HQ EL-ES04HQ Manual De Uso página 2

Introduction:
This smart PC power saver is designed to cut down the standby power consumption
of your connected PC in order to reduce the energy costs and therefore save money.
This power saver will automatically turn off the power after you've shut down the PC.
The EL-ESO4HQ is very easy to operate.
Operation:
Controlled power socket
1) Plug your desktop computer and other office appliances into any of the controlled
power sockets on the smart PC power saver.
2) Turn all your electrical appliances in standby mode.
3) Insert the power plug of the EL-ES04HQ into an available wall power socket, and
place the PC power on switch near the power key at your computer, wait a few
seconds and push the ON/OFF switch to connect the electrical appliances, the
indicator light will turn on.
4) Wait for a minimum of 30 seconds and then press the reset switch on the unit, the
indicator light will then turn off.
5) If you want to change or reduce the number of the connected appliances press
the reset switch for a period of 4 seconds continuously, then repeat steps 4 and 5
to re-set again.
6) Turn your desk computer automatically off as normal, the unit will shut down the
power after 1 minute.
7) The following day you only have to press the power on switch on your PC for
power.
ENGLISH
On/Off/Reset Switch
Power On Switch
2
Stable power-on
socket