Cooking Advices; Pan Quality - Pando PI 3100 Manual De Uso E Instalación

INOXPAN S.L.

COOKING ADVICES

Pan quality

Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
Ferromagnetic base
Too great a distance
Ferromagnetic element
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
•
Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
•
A magnet stucks on the bottom of the pan.
NOTE: Overheating of an empty pot with a curved base or a logo or embossed hollow in the centre
could damage the inductor.
SOUNDS DURING USE:
•
Noises during cooking. Some kitchen utensils, depending on the quality of the ferritic base
of the container, may be more intense if the composition of the base is poor or poor.
•
A slight "click click" sound is heard. This sound is normal. It is a safety indicator to detect
presence of the container on the inductor. It activates automatically when you turn on the
hob and during cooking.
•
A slight hum is heard. It is a normal sound that comes from the transmission of energy
from the inductor to the base of the container (electromagnetic waves).
aluminium with ferromagnetic bottom.
cupper, brass, glass, ceramic, porcelain.
Aluminium base
Base smaller
than the pot
Ferromagnetic ring
Ferromagnetic element
not parallel to the inductor
¡ATTENTION!
The use of improper
containers may
cause malfunction or
damage to the
appliance that would
not be covered by
the manufacturer's
warranty.
86