Anker eufy Security T8213 Guia De Inicio Rapido página 21

APPENDIX 3
12
POWERING THE DOORBELLWITH EXISTING DOORBELL WIRES
3.1 Verify whether the doorbell wires are working
1. Ring the existing doorbell to check if it is working. If the doorbell doesn't
ring, your doorbell wires may be defective. Power the doorbell on its own
2. Shut off power at the breaker. Turn the lights on / off in your home to make
sure the electricity in your house is properly shut off.
OFF
Always be careful when handling wires. If you're not comfortable
18 EN
OFF