Usage Methods - Qlima FFB 017 Instrucciones De Uso

• In order to avoid overheating, do not cover
• Be sure the table/floor you are placing this
• Installation only in a location which is
• Convection air slots and rear ventilations
• Do not put any flammable items on top of
• This product can NOT be fixed to a wall of

USAGE METHODS

Assembly of the heater
FFB 017 / FFB 022 (Fig1 / 2)
Parts List:
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
Safe Way to (re-) fill the Appliance
•
•
•
•
4
24
that they do not play with the appliance.
the device.
appliance can bear its weight
protected against cross aeration / air draft
of the appliance shall nog be covered /
obstructed
the appliance
roof
Fireplace body
Hardened Glass
Burner
Control tool
Unpack the fireplace and accessories. Check the content for completeness
and any damages incurred in transit. Keep children away from the packing.
Only install or place on a solid floor of non-flammable material
Remove all packaging and information material before assembly
Read warning sticker covering the burner, then remove the sticker
If something is broken or damaged: do not use the appliance. Return the
appliance to your store immediately.
Insert the glass into the intended slot
Place the burner into the burning chamber of the fireplace body.
Before refilling the appliance after extinguished fire: make sure to WAIT FOR
AT LEAST 10 MINUTES.
NEVER refill with a burning fire! (Fig 3)
Use a funnel for filling the appliance with bio ethanol. (Fig 4)
NEVER fill the appliance to a level above the max level indicator!
Fig 5: max level indicator
1x
1x
1x
1x