Troubleshooting - NODOR NorCare V36BK Instrucciones Para La Instalación, El Uso, El Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Troubleshooting 
The appliance makes lots
of noise?
Liquid flowing sound
inside the cabinet?
The appliance does not
start?
Compressor runs
continuously?
Door does not seal
tightly?
The appliance does not
cool sufficiently?
Unpleasant smells inside
cabinet?
Condensate on the glass
door?
The light is not working?
 
 
 
 
 
 Please adjust the front
leveling.
 Please keep the appliance a bit space from walls.
 It is normal becaus
inside.
 Make sure the appliance is connected to the power
properly.
 Make sure switch on the power.
 The compressor re-starts after 5 minutes for a
power cut.
 If no cold is being produced, call theafter-sale
service.
 After long time use, the door seal might get stiff &
distorted partially.
1. Heat the door seal with hot-wind blower or hot
towel.
2. The door seal get softened and close the door.
 Please adjust temperature setting.
 Keep the appliance away from sunlight or heat.
 Please do not open the door frequently.
 A little bit plastic smell for newly-buy appliance is
normal and will disappear after a short time.
 Clean the compartment and ventilate it for a few
hours.
 Please do not open the door frequently or for a
long time.
 Please do not set the temperature too low.
 High ambient temperat ure and humidity would
cause condensate.
 Check the power supply first.
 Call the retailer's after-sale service if the light is
broken.
13
foot, keep the appliance
e of the refrigerant working

Publicidad

Tabla de contenido
loading

Tabla de contenido