Description of the appliance
Accessories& name
9. Upper hinge
1. Housing
2. Shelf
8. Door seal
3. Cover board
7. Handle
4. Control panel
6. Door
5. Lower hinge
Note: Shelves, door frame, handle and other accessories could be different according
to different models and configuration. All photos in this manual are for reference. The
appliance you buy might not be exactly the same as shown here. Please refer to the
actual product.
Installing the handle and reversing the door of wine cooler
1. Install handle to the door frame of the appliance.
The handle is delivered in a separated package with screws
together inside the carton.
① Reveal two small holes on the door frame from inner side by
pulling out a bit the door seal
Aim the handle to the holes
②
and insert the screws from inside
Screw them up with
③
screw-driver ④
Put back door seal to cover the screws.
6