Telstar TVH254110MD Manual De Instrucciones página 17

Please unplug the show case for defrost and cleaning.
Defrost
• show case shall be manually defrosted. Unplug the show case and open the show case door, remove foods
and drawers before defrosting; Open the outflow holes and drainage holes (and place water container at the
outflow holes); indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost soft-
ens, an ice scraper might be used to the accelerate de-icing process. Please remove the food and put in a
cool place when defrosting before removing accessories.
No se utilizarán otros dispositivos mecánicos u otros medios para acelerar, excepto los recomendados por el
fabricante. No dañar el circuito de refrigerante.
Other mechanical devices or other means shall not be used to accelerate except those recommended
by the manufacturer. Do not damage the refrigerant circuit.
Stop using
Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended to
reduce the frequency of opening door and do not put fresh foods into the show case. Please unplug the show
case left unused for a long time for cleaning. Keep the door open to avoid the bad odor.
Do not turn upside, horizontally place or vibrate the show case, the carrying angle can not be greater than
45°. Please hold the door and hinge when moving.
Continuous operation is recommended when the show case is started. Please do not move the show
case under normal circumstances so as not to affect the show case's service life
Frequently asked questions
The following simple issues can be handled by the user. Please call the after-sale service department if the
issues are not settled.
Inoperation
Whether the show case is plugged and connected to power;
Low voltage; Whether temperature control knob is in the work
area Failure power or tripping circuit
17
FREEZER SHOW CASE
TVH254110MD