Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INTRODUCTION
Thank you for the purchase of our quality product. Used carefully and in accordance with the instructions set
out below. Please read and keep these instructions for future reference.
FLOODLIGHT PARTS
Brackets
Bolts
GENERAL INFORMATION
Do not mount ceiling/wall fittings onto damp sur-
faces such as newly painted or plastered areas as
this may cause discolouration of the finish.
Tools which may be required:
- Drill
- Cross Head Screwdriver
- Small Electrical Slotted Screwdriver
- Insulation Tape
FIXING INSTRUCTIONS
Do not wire this lantern into the lighting circuit -
use a switched fuse spur.
This fitting must be earthed. contact a qualified
electrician to install a suitable earth facility. Ensure
the electricity is turned o at the mains before ins-
talling or maintaining any electrical fitting. Please
note: For new installations, check for any electri-
cal cables or pipe work (gas/water) in the vicinity
of the intended mounting point for this product,
before proceeding with the installation.
8 | www.garsaco.com
INSTALLATION
1. Fasten the adjustable bracket with stainless steel
screws.
Aluminum
Alloy
PC
Cord
2. Connect the Main Line to the power wire of the
lamp.
3. Install the LED flood lights in the ground, wall, and
ceiling.
- Install ground
- Install wall
Publicidad
Tabla de contenido
