FONESTAR FCS-8250DS Manual De Usuario página 4

EN
SCENE
1.- PUT WAY: indicates the position of the column.
2.- STAGE SIZE: adjust the furthest distance of the column from the audience plane.
3.- BYPASS FOR INPUT: enabling this option removes any processing that is being applied to the column.
4.- CURRENT DISTANCE AND ANGLE: position of the audience for which the optimal parameters will be
set:
a.- DISTANCE: position from 1 metre to 10/20/30 metres as set in STAGE SIZE.
b.- ANGLE: on the drop-down menu select MIDDLE for 0º, UP for positive degrees from +1º to +45º,
and DOWN for negative angles from -1º to -45º. For THE UP and DOWN options, you must specify
the angle value in degrees.
5.- USE AUXILIARY CONTROLS TO ADJUST: quick position settings. Use the drop-down menu to allow
modification of only the angle, only the position, or both parameters.
a.- MINIMUM ANGLE: position 0°.
b.- MAXIMUM UPPER ANGLE: position +45º.
c.- MAXIMUM LOWER ANGLE: position -45º.
d.- RESET: resets the position.
e.- MINIMUM DISTANCE: position at 1 metre.
f.- MAXIMUM DISTANCE: position from 1 metre to 10/20/30 metres as set in STAGE SIZE.
- 4 -