FONESTAR FCS-8250DS Manual De Usuario página 9

5.- Align the column to the horizontal angle and tighten the nuts on both mounts until the position
is secure.
6.- Connect the column to the power supply. The connection of the power cord to the mains must always be
made in a properly insulated box which prevents contact with moisture or liquids, and more importantly,
for safety to avoid electrocuting living beings, fi res or other accidents that may occur.
2
CONNECTOR
~220V/50HZ
1
2
1
3
Ø 5-7 mm
Ø 3.5-7.5 mm
Ø 1 mm
PINOUT
Pin 1: line
Pin 2: earth
Pin 3: neutral
2
1 3
- 9 -
EN