■
Adjusting airfl ow direction
• Adjust the airflow direction properly. Otherwise, it might
cause discomfort and make the room temperature
uneven.
• Adjust the vertical airflow using the remote controller.
Adjust the vertical airflow
The air conditioner automatically adjusts the vertical
airflow direction in accordance with the operating
conditions when AUTO or A mode is selected.
To set the airflow direction you desire
Perform this function when the air conditioner is in
operation.
1
1
FIX button
Keep pressing or pressing briefly the FIX button
on the remote controller to move the louver in the
desired direction.
• In subsequent operations, the vertical airflow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
NOTE
Operating angle of vertical airflow louver will be different
during cooling, dry and heating operation.
13-EN
SWING
FAN
FIX
QUIET
Hi POWER
To automatically swing the airflow direction
Perform this function when the air conditioner is in
operation.
1
1
SWING button
Press the SWING button on the remote controller.
• To stop the function, press the SWING button.
• The FIX and SWING buttons will be disabled when the
air conditioner is not in operation (including when the
ON timer is set).
• Do not operate the air conditioner for long hours with
the airflow direction set downward during the cooling
or dry operation.
Otherwise, condensation may occur on the surface of
the vertical airflow louver and cause dew dripping.
• Do not move the vertical airflow louver manually.
Always use the FIX button. If you move the louver
manually, it may malfunction during operation.
If the louver malfunctions, stop the air conditioner
once, and restart.
• When the air conditioner is started immediately after it
was stopped, the vertical airflow louver might not move
for 10 seconds or so.
• Louver operation is limited when performing group
control. (see page 6)
- 13 -
Operations Manual
SWING
FAN
FIX
QUIET
Hi POWER
CAUTION