PROPAIN BAM BAM Serie Instrucciones De Montaje / Manual De Instrucciones página 18

// MOUNTING THE FRONT WHEEL
1
Put the locking plates on the screws for the front axle so that
the groove points away from the head of the screw.
2
Turn the bolts into the hub of the front wheel, but do not turn
them all the way in.
3
1. Put the front wheel into the dropouts of the fork.
2. Make sure the locking plates are on the outside of the
dropouts and engage with the groove in the opening.
3. Screw in the screws on both sides with a suitable hex
key and tighten them with a torque of 8 to 12 Nm.
4. Make sure that the rear wheel axle is tightened to a
torque of 8 to 12 Nm.