Setup Menu; Setting The Time; Using The Sleep Timer; Setting The On / Off Timer - Samsung 6 Serie Manual Del Usuario

■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as an
A/V Receiver/Home theater.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
Audio Delay: as an A/V Receiver/Home theater.
■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time

¦
O
MENUm → Setup → Time → ENTERE
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour, Minute and
am/pm manually.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
¦

Using the Sleep Timer

O
MENUm → Setup → Time → Sleep Timer →
ENTERE
t
■ Sleep Timer : Automatically shuts off the TV
after a preset period of time (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the Sleep Timer, select Off.

Setting the On / Off Timer

¦
O
MENUm → Setup → Time → Timer 1 →
ENTERE
You can set the TV to turn on automatically at a preset time.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
On Time
▲
00
Inactivate
▼
Off Time
00
Inactivate
Volume Source
10 TV
Repeat
Sun Mon
Once
L Move U Adjust
On Time / Off Time: Set the hour, minute, and activate
/ inactivate (To activate the timer with the setting you've
chosen, set to Activate.).
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically (USB can be selected
only when a USB device is connected to the TV).
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
00 am
00 am
Antenna Channel
Cable 1
Tue Wed Thu Fri Sat
E Enter R Return
21
English