Spdif Output; Setting The Time; Setup Menu; Using The Sleep Timer - Samsung 5 Serie Manual De Instrucciones

Ocultar thumbs Ver también para 5 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
volume and
MUTE
buttons will not operate and the
sound settings will be limited.
When Speaker Select is set to External Speaker.
x
TV Speaker: Off , External Speaker: On
When Speaker Select is set to TV Speaker.
x
TV Speaker: On , External Speaker: On
If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time

¦
O
MENUm → Setup → Time → ENTERE
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
If you disconnect the power cord, you have to set
the clock again.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.

Using the Sleep Timer

¦
O
MENUm → Setup → Time → Sleep Timer →
ENTERE
■ Sleep Timer: Automatically shuts off the TV
after a preset period of time. (30, 60, 90,
120, 150 and 180 minutes).
To cancel the Sleep Timer, select
Off.

Setting the On / Off Timer

¦
O
MENUm → Setup → Time → Timer 1 →
ENTERE
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
On Time
00
Inactivate
Off Time
00
Inactivate
Volume
Source
10
TV
Repeat
Sun
Mon
Once
L Move U Adjust
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you've
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
x
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
x
When there is only one photo file in the USB,
the Slide Show will not play.
x
If a folder name is too long, the folder cannot be
selected.
SLEEP
00
am
00
am
Antenna
Channel
Air
1
Tue
Wed
Thu
Fri
Sat
E Enter R Return
19
English

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

5000

Tabla de contenido