Maintaining The Vacuum; Replacing The Dust Bag; Maintaining And Replacing The Filters - Simplicity BRIO Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the Dust Bag

• Lift the latches on the lid of the machine
to release and open the top cover.
(Fig. A)
• Remove the dust bag and discard.
• Position the new dust bag and push the
bag collar on to the dust inlet.
• Replace the top cover by aligning
the lid latch indentations with the lid
latches and securing the latches.
Maintaining and
Replacing the Filters
For maximum performance, it's
important to keep the filters clean.
Not cleaning and replacing your filters
regularly with genuine Simplicity
replacement filters can reduce the
suction power and cause overheating.
To replace the pleated high-efficiency
filter and foam filter:
• Lift the latches on the lid of the vacuum
to release and open the top cover.
(Fig. A)
• Pull the black lid cover away from
the lid.
(Fig. B)
• Remove the used foam filter and
replace with the new foam filter.
• Press the black lid cover back into the
white lid.
• On the canister body, remove the
pleated high-efficiency filter.
(Fig. C)
• Install the new filter.
• Replace the top cover by lining up the
lid markings up with the lid latches,
then securing the latches.
11

MAINTAINING THE VACUUM

(Fig. A)
(Fig. B)
(Fig. C)

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido