Troubleshooting; Key Replacement Parts; For Best Performance - Simplicity BRIO Manual Del Propietário

Problem
The vacuum does
not power on.
Suction power is
weak.
Suction power is
too strong.
Any other service should be performed by an Authorized Simplicity Service Center.
To locate your nearest service center, visit our website at Simplicityvac.com,
or call 888-974-6759.

KEY REPLACEMENT PARTS

• Brio Cloth Bags: SBCH-3
• Brio High-Efficiency Filter Set: SFBRIO

FOR BEST PERFORMANCE

• Use machine with a bag.
• Keep machine and all accessories clean and in good operating condition.
• Replace bag when it's 2/3 full.
• Check and replace filters every 12 months or more frequently if vacuuming fine
powders such as flour or drywall dust.
• Always use genuine filters and parts, as use of other products may result in poor
cleaning or filtration performance. Genuine Simplicity filtration products are
designed for maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow this owner's manual.
12
Check Point
Power cord
Bag
Blocked hose or wand
Suction control dial (on
body
Suction airflow adjuster
(on handle)

TROUBLESHOOTING

Possible Solution
Insert the power plug firmly into an
electrical outlet
Replace if the bag is full.
Remove obstruction.
Rotate the dial in the direction of
the "—"
Pull back on the slide to increase
airflow.