AEG Deli 3 Sport Manual Del Usuario página 18

WARNING ! To reduce risk of injury, never place the blade set on the base without the bottle
BG
properly attached.
7
Plug into mains.
NL
8
For Create 3 Blender (Easy Push button UI )
Push and hold the easy push button (2a) to start mixing.
EN
Once done, release the easy push button to stop mixing.
For Create 4 Blender (Knob Speed selector UI)
FR
Turn the knob (2b ) to 1 or 2 according to recipe/ preference (see no.2 speed setting).
Turn the knob to "PULSE" for short burst of power. Once done, turn the knob to "0" to stop mixing.
DE
Pro Tips! With Pulse mode you can give the ingredients a quick mix to achieve your desired consistency.
WARNING ! Never run the blender with heavy loading (max capacity) under setting 1 with takeaway
GR
bottle. Never run the blender empty and without any liquid. Those can cause overheating and can
damage the product.
PT
WARNING ! During operation, do not remove your jar from blender base. If it's necessary to remove
the jar, please turn of f the appliance first then remove it.
ES
WARNING ! With heavy load ( maximum capacity), do not let the blender run for more than 2 minutes.
Allow it to cool down for at least 10 minutes before continuing.
AR
9
Remove the jar ( 4,6) from blender base ( 1 ) by turning it counterclockwise and pull it of f.
Take of f the blade set by turning it counterclockwise.
WARNING ! Always take of f the blade set within 1 minute after blending to avoid hard
disassemble afterwards.
10
Wash the components right after use in order to avoid drying of food residue on components.
Pro Tips! Always detach blade set from jar and rinse them clean even before placing it into the dishwasher.
Fill the jar with 0.4L lukewarm water and dishwasher liquid then run MAX speed for 30 seconds
for rinsing purpose.
11
Attach the takeaway bottle lid (5 ) to enjoy your blending on-the-go.
12 Using glass jar
a. Fill the ingredients in the glass jar (10 ).
b. Place the lid ( 11 ) on the glass jar ( 10).
c. Place the assembled glass jar on the blender base (1 ), Rotate it clockwise until it locks into position.
WARNING! The appliance can't be turned on unless the jar is perfectly fitted on the blender base.
d. Turn the knob (2b) to 1 or 2 according to recipe/preference ( see no.2 speed setting).
Turn the knob to "PULSE" for short burst of power. Once done, turn the knob to "0" to stop mixing.
WARNING ! Never operate appliance without lid (11 ).
Pro Tips! With Pulse mode you can give the ingredients a quick mix to achieve your desired consistency.
e. Remove the jar ( 10 ) from blender base ( 1 ) by turning it counterclockwise and pull it of f,
then pour and serve.
13
Using grinder
a. Fill the ingredients in the grinder jar (7).
b. Fasten the blade set ( 3 ) on the open end of the jar by turning it clockwise. Turn the grinder upside down.
WARNING ! The blades are very sharp!
c. Push down the assembled grinder onto the blender base (1 ) and rotate it clockwise to lock until it clicks
into position.
WARNING! The appliance can't be turned on unless the jar is perfectly fitted on the blender base.
(The triangle symbol aligned with lock symbol on blender base )
d. Turn the knob ( 2b ) to 1 or 2 according to recipe/preference.
Once done, turn the knob to "0" to stop mixing.
e. Turn the assembled grinder counterclockwise to release it of f from blender base ( 1 ).
Take of f the blade set (3) by turning it counterclockwise.
WARNING ! Always take of f the blade set within 1 minute after blending to avoid hard disassemble
afterwards.
WARNING ! Do not touch the sharp blade after grinding as it might be hot after several grinding cycles.
f. Attach the lid (8 ) to use the jar for storage.
14 Unplug the appliance.