JR SHUTTER 2.0 Manual Del Usuario página 13

ON Dead man switch(at Common, Opening and Closing
terminals).
OFF Limit switches (at Common, Opening and Closing
terminals).
2 DEAD MAN IN OPENING MANEUVER (DIP 1 ON)
ON To startopening maneuver, is necessary to hold pressed
the transmitter's button or the PROG switch.
Ifthebuttonisnotheld, maneuverwill stop.
OFF Opening is set as direct order operation.
ON To start the closing maneuver, hold pressed the
transmitter's button or the PROG button.Ifthebuttonisnotheld,
maneuverwill stop.
OFF Closing is set as direct order operation.
ON Photocell is disabled (It is not neccessary to
with this position.
OFF Photobeam is enabled. This configuration allows the
programmation of optional automatic closure.
OPTION 1 –REMOTE MEMORIZATION MODE
Press LEARN butto until 1 beep sounds, release the button, now you
have to press the button in the original remote. It will beep again and
then the remote is programmed.
SHUTTER 2.0
1 LIMIT SWITCHES /DEAD MAN
3 DEAD MAN IN CLOSING MANEUVER (DIP1 ON)
bridge the security input). Automatic closure is not available
PROGRAMMATION
PROGRAMATION MENU
4 PHOTOBEAM
13