JR SHUTTER 2.0 Manual Del Usuario página 14

OPTION 2 - MANEUVERS TIME PROGRAMMING
Press LEARN button until 2 beeps sound that means it is on maneuvers
time programming.
OPTION 3 - CHANNEL ERASE
Press LEARN button until 3 beeps sound that means it is on delete
mode of programmed channel.Channelwill be deleted.
OPTION 4 (DIP 1 ON)
UP-DOWN / SEQUENTIAL SWITCH
Press LEARN button, until it beeps
4 times, this means up/down
option is on. When the button is
released,it
change to sequential switch and
viceversa.
One shortbeepwill
up/down selection and a longer
beep will indicate sequential
switch selection.
Thisoption can ONLY be done
withthetransmitter
OPTION 5 –MEMORY ERASING
Press LEARN button until it beeps 5 times. Thisindicatesthe erasing
mode is activated. When releasing the button all channels and
remotes will be erased.
*Note: once the memory has been deleted, it is MANDATORY to
repeat option 1 and 2 for the correct functioning of the control board.
REMOTE PROGRAMMING
Select option 1 from the MENU (Press LEARN button until it beeps one time, this
means it is on remote memorization mode).
SHUTTER 2.0
will automatically
indicatethe
OPTION 4 (DIP 1 OFF)
STEP BY STEP/INVERSION TO
CLOSURE
Press LEARN button until it beeps 4
times. This means inversion to
closure option
selected.When
button, menu changes to inversion
to closure and viceversa.
One shortbeep means step by step
selection and a longer beep
means inversion to closure.
14
has been
releasing the