Inserting And Removing Flash Devices - ELBE HIFI 1007 BT Manual De Instrucciones

INSERTING AND REMOVING FLASH DEVICES

Flash devices are inserted at the
Inserting and Removing USB
Flash Memory Devices
USB
Insert the USB connector into the socket
on the unit and press gently to seat. The
connector can only be inserted one way.
Remove the device by gently pulling it
out of the socket.
Inserting and Removing
USB Flash Card Devices
SD MMC
Insert the card into the slot by gently pressing
into position until it locks in place. Cards can
only be inserted one way.
Remove the card by gently pulling it out of the slot.
Be sure to use the proper card adapter if required. Failure to use the correct adapter may
cause damage to the memory card or the unit.
Only one type of memory card can be inserted at one time.
!
All manuals and user guides at all-guides.com
front panel of the unit.
14