Extremis Marina combo Manual Del Usuario página 22

Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
• Do not use any sharp tools to open the
packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Do not put out cigarettes on the table.
• Not grafitti proof.
• Do not leave children unattended whilst playing
on the table.
• To avoid danger of suffocation, keep plastic bags
away from babies and children.
• Colours can differ over years and from batch to
batch.
Product
• Do not drag the table, but carry it with minimum
2 people.
• Anchoring the product has to be done by
qualified people.
• For anchoring: use suitable bolts or screws from
a specialized store depending on the material
your terrace is made of.
• We strongly advise you against standing on top
of the table! A concentrated load can cause small
perceptible cracks in the profiles that might be
visually annoying, although they do not affect the
strength of the table in any way.
• For table with 3 legs or more, we recommend
using trestles to attach the table leg assemblies
to the tabletop, instead of keeping it upside
down.
Powder-coating
• White powder-coating requires more
maintenance.
• Do not use abrasive scouring powders or
scourers as they will scratch the surface.
• Colour can fade to some extent when exposed to
UV.
• Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
• Dark colors can get very hot in sunny weather.
22
Coated fiberglass
• Stains should be removed immediately with a
clean, soft cloth, particularly in case of dark-
coloured liquids sush as wine, ink, coffee, coke,
oil or bird droppings. If left to dry, these liquids
may cause permanent damage!
• Avoid using aggressive and abrasive products.
• Clean daily with Extremis Multi Cleaner.
• In case of stubborn stains, we recommend using
a magic sponge.
• The white hue can change to some extent when
exposed to UV.
• Color variations are possible, and even likely.
This is intrinsic to this production technique. It
contributes to the natural effect.
ASSEMBLY INSTRUCTIONS
Marina combo - p6
1. Assembly picnic leg: Slide the picnic legs into the
tabletop connection so that the holes are aligned,
and secure them with the help of the six M6x16
hex socket screws and lock nuts per leg. First,
place all the bolts in the holes and make sure
that the bolts are on the outside, but do not fully
tighten them yet.
2. Slide the bench supports onto the picnic legs
and fasten them with the help of two M6x16 hex
socket screws and lock nuts per bench support
but do not fully tighten them yet.
3. Slide the bench connections over the picnic
leg and bench support and fasten them with
four M6x16 hex socket screws and lock nuts per
bench connection. Make sure that the bolts are
on the outside. Tighten all the bolts. Max. 8,8 Nm.
4. Now screw the levelling feet into the legs. Repeat
step 1 to 4 for each leg set and then set them
aside.
5. Assembly table leg: Slide the table legs into the
tabletop connection so that the holes are aligned,
and secure them with the help of the six M6x16
hex socket screws and lock nuts per leg. First,
place all the bolts in the holes and make sure
that the bolts are on the outside, but do not fully
tighten them yet.
6. Now screw the levelling feet into the legs. Repeat
step 1 to 2 for each leg set and then set them
aside.
7. Place the 5 or 6 tabletop profiles on the floor
with the slot openings facing up, and use the
packaging as protection. Make sure the crosses