Charging The Battery Pack; Charging A Device - LEITZ 6526 Instrucciones De Uso

Charging the battery pack

•
Use the cable supplied to connect the micro-USB connector
to the USB port of a computer or to a USB power adapter
(Figure 1).
The charging process starts automatically. The indicator shows
the progress of charging:
– Orange: Charge level is 20 % or less
– Green: Charge level is 20–100 %
– Off: Charging is completed
•
Unplug the battery pack when charging is completed.

Charging a device

Make sure the battery pack is removed from the USB power
source. Otherwise it is not possible to charge a device.
m
CAUTION!
•
Charge your devices in accordance with the instruction
manual of each device. Follow all safety instructions given
there.
•
Make sure that the maximum permissible charge current of
1 A is not exceeded.
•
Connect the device you wish to charge to the Lightning con-
nector on the battery pack (Figure 2).
The battery pack will turn off automatically when the device it
is charging is fully charged or when the battery pack has fully
discharged.
•
You can check the charge level of the battery pack at any time
by looking at the charge level indicator. To do this, press the
button (Figure 3).
EN
7