Overmax Flow Multi Control Manual De Usuario página 24

Register new user
1.
To sign up in the application, click „Sign up" (fig. 1), and then read
and accept the Privacy Policy (fig. 2).
2.
Enter your phone number or e-mail address to receive the
verification code (fig. 3).
3.
Enter the verification code into empty field (fig. 4).
4.
Enter unique password and click „Done" (fig. 5).
Log into existing account
1.
To log into the existing account, click „Log into existing account"
(fig. 1).
2.
Select country/region.
3.
Enter correct phone number or e-mail address and password,
log in afterwards.
Add device manually (fig. 6)
1.
Switch on the power strip. Connect the phone to the Wi-Fi
network that the device will connect to later.
2.
Select Flow Multi Control from the list (fig. 7).
3.
Select Wi-Fi network which you wish to connect your device to.
Enter password and click „Next" (fig. 8). Note: Only Wi-Fi 2.4GHz
networks are supported.
4.
If the device light does not flash fast, reset it by pressing the
ON/OFF key for 5 sec. (fig. 9).
5.
When adding, the device must be very close to the Router (fig. 10).
6.
If the device has been correctly added, you will see a message
„Added successfully" (fig. 11). Now you can select your device
from the list of added devices.
EN