Overmax Flow Multi Control Manual De Usuario página 25

Panel
1.
To activate or deactivate all ports, simultaneously select (1)
(fig. 12).
2.
It is possible to activate and deactivate one port. To do so, click
the port which you want to turn on or off.
Schedule
1.
To set the schedule, select (2) in the panel (fig. 12).
2.
Select port which you wish to set the schedule for (fig. 15).
3.
Select „Add" (fig. 16).
4.
Set time at which a specific event is to occur, and then click
„Save" (fig. 17).
Timer
1.
Select (3) in the panel (fig. 12).
2.
Select port which is to activate or deactivate after a specific
period of time (fig. 13).
3.
Set time and select „OK" (fig. 14).
The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to
selective collection. The product must not be disposed of together
with domestic waste as it may pose a threat to the environment and
human health. Worn-out product must be handed over to electrics
and electronics recycling point.
The pictures are for reference only. The real design of the products
may differ from the pictures presented.
EN