RECA Zone 360 XL Instrucciones De Uso página 4

GB OPERATING
INSTRUCTIONS
1. Carry handle
2. Cable winder
3. On/off switch
4. Integrated socket with protective cover
5. Base
6. Mains plug
7. Protective cover
8. Integrated hanging hook
DELIVERY INCLUDES
1. LED construction site floodlight
2. Operating instructions
Unpack all parts and check that everything is there and that nothing is da-
maged. Do not use damaged products. If you find damage on the product,
contact your dealer.
PROPER INTENDED USE
• The construction site floodlight is used for the illumination of large working
areas indoors and outdoors and is delivered ready to connect, with connec-
tion cable and plug.
• Plug the CEE 7/4 („Schuko") plug only into IPX4 protected sockets in
outdoors areas / damp areas.
• The construction site floodlight is not intended for any other applications.
• Not suitable for household room lighting.
• Suitable for extreme physical conditions.
SAFETY INSTRUCTIONS
These operating instructions contain important information for the first use and
normal operation of the following product:
The following text refers to the site floodlight simply as the lamp or the product.
Read this manual carefully before using the lamp for the first time and proceed accordingly.
Keep these operating instructions for future use or for the reference of future users.
Failure to follow the operating instructions and safety instructions may result in
damage to the product and hazards (injuries) for the operator and other persons.
The operating instructions refer to applicable standards and regulations of the Euro-
pean Union. Please also adhere to the laws and guidelines specific to your country.
SIGNS AND SYMBOLS
Bitte beachten Sie folgende Zeichen und Wörter, welche Sie in der Bedienungs-
anleitung, auf dem Produkt und auf der Verpackung verwendet werden.
Information - Useful additional information about the product
Caution - The caution warns you of possible damage of all kinds
Warning - Attention – Danger! May result in serious injury or death
OBSERVE SAFETY INSTRUCTIONS!
Avoid eye injuries - Never look directly into the beam of light or shine it into other
people's faces. If this occurs for too long, the blue light portion of the beam can
cause retinal damage. If the light beam shines into the eyes, close the eyes and
turn the head away from the light beam.
This lamp exceeds the conditions for risk-free use. The risk when using it depends
on how the user handles the lamp.
• Information for the light as well as the mains voltage on the socket must
match with the type plate.
• Do not crush the connection cable or damage it in any other way.
• Do not use the product if there is damage to the housing, plug or cable.
Contact your local authorised specialist or the service address of the
manufacturer.
• Do not open or modify the product! Repair work shall only be carried out by
the manufacturer or by a service technician appointed by the manufacturer or
by a similarly qualified person.
• Caution: There is a risk of electric shock in the event of damage on the
housing or on the mains connection cable! Risk of death!
• Keep the product and the packaging away from children. This product is not
a toy. Children should be supervised in order to ensure that they do not play
with the product.
• This product is not to be used by persons (including children) who have res-
tricted physical, sensory or mental capabilities or who do not have adequate
experience and knowledge in handling this product. Such persons must be
instructed beforehand by a supervisory person who is responsible for their
safety or must be supervised during the use of the product!
• The LED light source cannot be replaced. When the LED comes to the end of
its service life, the complete lamp must be replaced
• All illuminated objects must be at least 10cm away from the light!
• The lamp shall not be placed face-down or allowed to topple face-down.
Ensure that it is stable.
• This product is not a toy to be played with.
• Keep out of the reach of children!
• Failure to observe the safety instructions can result in dangerous injuries to
persons or damage to the device!
• Always keep the product dry
ATTENTION:
• Do not use the product in potentially explosive areas or in the rain and do not
expose it to excessive heat.
• Do not use the product if it appears to be damaged
• Never submerge the product in water or other liquids. Never touch a device
that is connected to the mains if it has fallen into water. In this case, remove
the mains plug immediately.
Caution! Risk of death due to electric shock!
FIRST USE / OPERATION
Plug the mains plug in to a mains power outlet. The on/off switch is on the side
of the housing.
The lamp shall be set down only on stable and non-slip surfaces that are as close
to horizontal as possible. When placing it on slight inclines ensure that the lamp
cannot topple over.
HOLDING DEVICES (HOOKS, STAND, ETC.)
If the light is the to be fastened with a holding device, ensure that the holding
device is firmly/properly fastened in place. Observe max. mounting height! (Stand
and fastening materials not included).
INTEGRATED SOCKETS
Do not connect devices with a combined power rating over 3000W to the in-
tegrated sockets.