ECRON AD 836A Manual De Usuario página 43

STEP 4
TOP OF THE HEAD
1. Using the 9mm or 12mm comb
attachment, cut the top of the
head from back to front against
the direction the hair normally
grows (see figure 4). In some
cases, this may require the
reverse, so cut from front to back.
2. 3mm or 6mm accessories
are used to achieve a shaved or
short cut.
3. For longer hair on top use the
comb provided and lift the hair on
top of the head. Cut above the
comb with the hair raised or held
up between the fingers and cut it
to the desired length (see figure 5
and 6). Always work from the back
of the head. You can cut the hair
shorter gradually reducing the
space between the comb/fingers
and head. Remove the cut hair
with the comb and check for
uneven strands.
4
5
6
EN
43