Diamond blue sea Manual De Usuario página 22

SYSTEM TROUBLESHOOTING
PROBLEM
PUMP
EQUIPMENT
POSITION
The pump does not stop:
The pump does not start:
The machine does
produce water:
High pressure switch is not adjusted (check
screw with Allen wrench No. 2).
High pressure switch.
Open flushing.
Possible leak.
The accumulator tank is not full enough (wait
between 2 and 4 hours).
The equipment input key is broken or closed.
The low pressure switch is broken.
The high pressure switch is not adjusted.
The transformer is broken.
Prefiltration filters are stuck.
Insufficient network pressure.
not
The pump does not start.
20
SOLUTION
EN