EGAmaster 66556 Manual De Instrucciones página 16

6
5
Number Product Name
1
Hanging Hole
2
Signal Light
3
Button Switch
4
Front Lock Ring
5
6
LED Lighting
7
Front Cover Thread
8
Press-plate Start
1) Start Mode: Set the start mode on the controller
(1) Independent press-plate mode
(2) Independent press-down mode
(3) Both available
2) LED Lighting: Set tool lighting on the controller
(1) Start lighting
(2) Continuous lighting
(3) Shut down
3) Signal light
4) Button Switch
Turn on and off the setting for screw removal, there will be no OK or NG signal action when
screw removal is in action.
16
FUNCTION / OPERATING INTRODUCTION
7
4
Headgear
OK Light
8
Description Use
Hanging hole is available, to hang the screwdriver
Display OK light, NG light, screw removal starts and
Switch rotation direction CW/CCW
Lock stationary gearbox and housing
Load/unload and fixing the screwdriver bits
Four holes in total, used as auxiliary lighting according
Help to fix on the auxiliary arm
Press to start the screwdriver
1
2
3
stop signal
to setting
NO Light