Midwest Ovation Trainer Instrucciones De Armado página 4

To Disassemble the Crate:
1. Unhook the end panel by gently pressing on the top panel
and pulling the end panel outward to release the hooks.
Let the end panel gently fall into place at the bottom of the
crate.
2. Repeat Step 1 with the front door panel.
3. Allow the sides and top of the crate to swing down and
collapse to the side until the side door panel reaches the
floor.
4. Fold the top and side door panel over like you are closing a
book.
5. Using the side door handle, pull the door toward you (about
2 inches). Lift the safety stop and push the door down and in
until the crate hooks are firmly secured around the crate wire.
Place the handle back into the down position.
6. The additional plastic handle(s) are provided for transporting
the crate in the folded position. They are not intended for use
when the crate is fully assembled. Attach the carrying handles
to the center wire on the outside of each crate hook, between
the hook and the outer edge of the folded crate. To remove the
handles from the crate, push down firmly until they disengage.
Be careful not to twist the handles as they could break.
4