Fan Speed - Essick Air 800 Serie Manual De Cuidado Y Uso

All manuals and user guides at all-guides.com
IMPORTANT FILLING INFORMATION
CAUTION: Before filling, ensure unit is turned
OFF and unplugged.
8. With the power off, fill the water reservoir with
water to the level indicated on the wick frame
assembly and "Fill to Here" decal on the
cabinet side wall. Do not overfill. When first
filled, the reservoir capacity is 6 gallons.
NOTE: When the reservoir is being filled for the
first time, the dry wick absorbs water, requiring
more water on the first fill up than subsequent
fillings.
NOTE: When the unit becomes empty, the control
display will flash "F" for refill and automatically
shuts off the motor.
9. Turn power off, refill, then, turn unit on again.
NOTE: We recommend using Essick Air
Bacteriostat Treatment when you refill the water
reservoir to eliminate bacterial growth. Add
bacteriostat according to the instructions on the
bottle.
OPERATION
The digital controller has a display that provides information on the status of the
unit. Depending on which function is being accessed, it displays relative
humidity, fan speed, set humidity and indicates when the unit is out of
1. Plug cord into wall receptacle. Your humidifier is now ready for use.

FAN SPEED

2. Press the power button and select fan speed: F1 (low) or F2 (high).
NOTE: When excessive condensation exists, a lower speed setting is
recommended.
Note: Place the unit at
least FOUR inches away
from any walls or
curtains. Unrestricted
airflow into the unit will
result in the best
efficiency and
performance.
4
water.