SCHULLER VITO Manual Del Usuario página 11

1. INSTALLATION PREPARATION.
To avoid personal injury
meters between the floor and the blades and that there is at least 76cm of horizontal distance
between the fan and any
Make sure the ceiling can support the weight of the
fan.
2. THE FAN BODY ASSEMBLY.
A- Remove the "fixed screws" and keep it, then loosen the screws at the keyhole by the
screwdriver(Fig.2)
B- Hold on the ceiling plate by the hand and rotate the fan body, then remove the ceiling plate
(Fig.3)
INSTALLATION GUIDE
and damage, ensure that the hanging position allows
wall or other obstruction.(Fig.1)
11
for at least 2.1